ID Event 7026

Hi!

This error has occured 3 times in the last week, resulting in restores each time.
Is there anyway I can track down the device which may be causing this problem?

I can boot into safe mode


Regards

 

https://www.google.com/#q=event+id+7026+winxp&spell=1

as you can see from the above search page there are many hits on this issue, to further help you what is the Source of the event??

see picture:

 

Id 7026

Hi!

There were also 5 x ID 7001 at the same time

All 6 ID's from Source Service Control Manager

Regards

 

May I strongly suggest you install and regularly run this:

https://www.slimwareutilities.com/slimdrivers.php

During the initial install a small screen will open, offering to install PCBackup or something. Remove the tick and click next.

 

@gwladok5, look in device manager, are there any warnings on any device??

insure you show hidden devices by clicking on View and selecting show hidden devices.

If there are warnings, then tell me for which device

 

Hi

These are my errors on startup today

No errors showing on Device Manager


Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 08/09/2014
Time: 10:52:16
User: N/A
Computer: HOME
Description:
The following boot-start or system-start driver(s) failed to load:
DwProt
Lbd




Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7001
Date: 08/09/2014
Time: 10:50:49
User: N/A
Computer: HOME
Description:
The Infrared Monitor service depends on the Terminal Services service which failed to start because of the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.



Event Type: Warning
Event Source: MRxSmb
Event Category: None
Event ID: 3033
Date: 08/09/2014
Time: 10:50:42
User: N/A
Computer: HOME
Description:
The redirector was unable to register the address for transport NetBT_Tcpip_{3FC82264-5458-4406-A355-C1 for the following reason: . Transport has been taken offline.


Data:
0000: 00 00 00 00 04 00 4e 00 ......N.
0008: 00 00 00 00 d9 0b 00 80 ....Ù..€
0010: 00 00 00 00 bd 00 00 c0 ....½..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........


Event Type: Error
Event Source: NetBT
Event Category: None
Event ID: 4321
Date: 08/09/2014
Time: 10:50:42
User: N/A
Computer: HOME
Description:
The name "HOME :0" could not be registered on the Interface with IP address 192.168.1.64. The machine with the IP address 192.168.1.254 did not allow the name to be claimed by this machine.


Data:
0000: 00 00 00 00 04 00 56 00 ......V.
0008: 00 00 00 00 e1 10 00 c0 ....á..À
0010: 01 01 00 00 01 00 00 c0 .......À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........


Event Type: Error
Event Source: nvidesm
Event Category: None
Event ID: 4
Date: 08/09/2014
Time: 10:49:48
User: N/A
Computer: HOME
Description:
Driver detected an internal error in its data structures for .


Data:
0000: 00 00 00 00 01 00 58 00 ......X.
0008: 00 00 00 00 04 00 04 c0 .......À
0010: 00 00 00 00 c2 00 00 c0 ....Â..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

 

Incidently, these were the errors when I could not start up:

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7026
Date: 07/09/2014
Time: 08:01:42
User: N/A
Computer: HOME
Description:
The following boot-start or system-start driver(s) failed to load:
AFD
AsIO
BANTExt
Cinemsup
DwProt
ElbyCDIO
Fips
intelppm
IPSec
Lbd
MRxSmb
NetBIOS
RasAcd
Rdbss
SASDIFSV
SASKUTIL
SCDEmu
Tcpip

 

http://answers.microsoft.com/en-us/...-drivers/f5b65cd1-1cf8-4c12-bb6f-156d4c286ff2

see above link and the reply by A.User, this 7026 error is due to booting into safe mode with networking, have you done this??

 

Hi Elizabeth23

I'm afraid I've been giving you mis-leading info.

On each occasion that the PC has not fired-up, I've restored the HDD to a backup.

This would mean all info on the Events Viewer would have disappeared.

The info I have given you would refer to the Events Viewer immediately after I started up in Safe Mode before restoring.

I should have given you the log prior to this.

Obviously I must wait until the next "event" if & when that occurs before posting on here again.

I'm sorry for wasting your time

 

no problemo, we all learn something new every day.