Imagex Error: 1340 <filename> [Restore Sec. Descriptor:..failed]

I am restoring a WIM containing a capture of XP with Imagex.

About 7% in, I get this suite of error messages (below). Since I did not
know it would cause a problem, I did not exclude them.

Short of mounting the WIM and deleting the log files, does anyone have any
suggestions as to how I could work around this error. This is not the first
time I have gotten it, but the first time it has caused a failure - normally
it just skips on past these.

Thanks!

DAVID

[Error: 1340 c:\Documents and Settings\All Users\Application
Data\FLEXnet\adobe_00080000_event.log. [Restore Sec. Descriptor: (seq. 30) ->
RestoreSecurityInfo() failed]

[Error: 1340 c:\Documents and Settings\All Users\Application
Data\FLEXnet\adobe_00080000_event.log. [Restore file metadata: (seq. 30) ->
RestoreSecurityDescriptor failed]

[Error: 1340 c:\Documents and Settings\All Users\Application
Data\FLEXnet\adobe_00080000_event.log

Error restoring image.

The inherited access control list (ACL) or access control entry (ACE) could
not be built.

David,

I'm having the exact same error. Did you ever find a solution to this? Thank you!

Michael...

> On Wednesday, December 03, 2008 8:48 AM DavidALan wrote:

> I am restoring a WIM containing a capture of XP with Imagex.
>
> About 7% in, I get this suite of error messages (below). Since I did not
> know it would cause a problem, I did not exclude them.
>
> Short of mounting the WIM and deleting the log files, does anyone have any
> suggestions as to how I could work around this error. This is not the first
> time I have gotten it, but the first time it has caused a failure - normally
> it just skips on past these.
>
> Thanks!
>
> DAVID
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log. [Restore Sec. Descriptor: (seq. 30) ->
> RestoreSecurityInfo() failed]
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log. [Restore file metadata: (seq. 30) ->
> RestoreSecurityDescriptor failed]
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log
>
> Error restoring image.
>
> The inherited access control list (ACL) or access control entry (ACE) could
> not be built.


> Submitted via EggHeadCafe - Software Developer Portal of Choice
> SharePoint WorkFlow Basics
> http://www.eggheadcafe.com/tutorials...ow-basics.aspx

David,

Did you ever find a solution to this problem? I'm experiencing the same issue. Thank you!

Michael...

> On Wednesday, December 03, 2008 8:48 AM DavidALan wrote:

> I am restoring a WIM containing a capture of XP with Imagex.
>
> About 7% in, I get this suite of error messages (below). Since I did not
> know it would cause a problem, I did not exclude them.
>
> Short of mounting the WIM and deleting the log files, does anyone have any
> suggestions as to how I could work around this error. This is not the first
> time I have gotten it, but the first time it has caused a failure - normally
> it just skips on past these.
>
> Thanks!
>
> DAVID
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log. [Restore Sec. Descriptor: (seq. 30) ->
> RestoreSecurityInfo() failed]
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log. [Restore file metadata: (seq. 30) ->
> RestoreSecurityDescriptor failed]
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log
>
> Error restoring image.
>
> The inherited access control list (ACL) or access control entry (ACE) could
> not be built.


>> On Tuesday, October 12, 2010 11:48 AM Michael Hare wrote:

>> David,
>>
>>
>>
>> I'm having the exact same error. Did you ever find a solution to this? Thank you!
>>
>>
>>
>> Michael...


>> Submitted via EggHeadCafe - Software Developer Portal of Choice
>> SharePoint Lists In Excel Via VSTO
>> http://www.eggheadcafe.com/tutorials...-via-vsto.aspx

David,

Did you ever find a solution to this problem? I'm experiencing the same issue. Thank you!

Michael...

> On Wednesday, December 03, 2008 8:48 AM DavidALan wrote:

> I am restoring a WIM containing a capture of XP with Imagex.
>
> About 7% in, I get this suite of error messages (below). Since I did not
> know it would cause a problem, I did not exclude them.
>
> Short of mounting the WIM and deleting the log files, does anyone have any
> suggestions as to how I could work around this error. This is not the first
> time I have gotten it, but the first time it has caused a failure - normally
> it just skips on past these.
>
> Thanks!
>
> DAVID
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log. [Restore Sec. Descriptor: (seq. 30) ->
> RestoreSecurityInfo() failed]
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log. [Restore file metadata: (seq. 30) ->
> RestoreSecurityDescriptor failed]
>
> [Error: 1340 c:\Documents and Settings\All Users\Application
> Data\FLEXnet\adobe_00080000_event.log
>
> Error restoring image.
>
> The inherited access control list (ACL) or access control entry (ACE) could
> not be built.


>> On Tuesday, October 12, 2010 11:48 AM Michael Hare wrote:

>> David,
>>
>>
>>
>> I'm having the exact same error. Did you ever find a solution to this? Thank you!
>>
>>
>>
>> Michael...


>>> On Tuesday, October 12, 2010 11:50 AM Michael Hare wrote:

>>> David,
>>>
>>>
>>>
>>> Did you ever find a solution to this problem? I'm experiencing the same issue. Thank you!
>>>
>>>
>>>
>>> Michael...


>>> Submitted via EggHeadCafe - Software Developer Portal of Choice
>>> Why GUIDs are not a good idea for SQL Server Primary Keys
>>> http://www.eggheadcafe.com/tutorials...mary-keys.aspx